Renegade Pulleys

Hi Guys,

I have several of the crank pulleys on the way! Should about a week... Price $170.

If anyone needs an 8 rib tensioner or supercharger pulleys... I will need to know what kind of supercharger you run...

TTYS,
Dave
 
Great put me down for one. Shoot me an email or pm when you need the c.c. number or a check. :tu:
 
Hey Dave, I'll probably be in for one. Could you tell me how much for the crank pulley, tensior pulley and a Vortech 3.33? Or maybe you could get me a renegade kit at a reduced price?
 
I guess I would be in as well, only if I can get the Pickrel tensioner and mustang water pump pulley as well, otherwise I'll stay as it is
 
LW or anyone else running a Vortech company kit,

Here's the deal... You can't buy the renegade conversion kit with a 3.33, The conversion comes with either a 3.00 or 3.15, longer bolt and key for the 8 rib pulley, 8 rib tensioner pulley with spacer and bolt, Also a belt that fits a mustang is included... You can buy it in this form from Vortech for $227 which is a good deal if you have a stang but a 3.15 supercharger pulley would be flat out dangerous without additional fuel system mods, Also the supercharger pulley does not fit a Lightning correct! You have to run it backwards and add washers behind the pulley to get the alignment right... This is not the way I like to do things so I would mill the pulley to fit correctly... You will also need a Mustang style water pump pulley to clear the big crank with button head bolts, I don't know what the correct belt length would be for the larger size pulleys but "hopefully" the correct sizes are availible... The belt length is pretty critical with the Vortech company setup due to the head units mounting location and its close proximity to the water pump... I think maybe Billy from here on the board runs a 8.0 -3.15 combo so if we get his belt length I think I can figure what size belt will work with a 3.33 or bigger pulley... FWIW, a 3.33 will be crankin pretty good (about 47, 500 at a 5500 RPM shift point) The 3.47 or even a 3.70 would be a better choice if a small injector, high gain FMU approach is used...

Prices,

Renagade crank 4.75 / 8 under / over drive $170.

Vortech "aluminum" supercharger pulleys
3.15, 3.33, 3.47, 3.70 Modified to fit"
"with the correct bolt and key. $90.

5.50 underdrive water pump pulley
"aluminum" with "button head bolts" $45.

Plastic tensioner pulley with spacer, bolt & nut $35.

Aluminum tensioner pulley with spacer,
bolt, nut & bearing retainer $50.


If you want to source some of these parts own that's fine by me just let me what you need...

TTYL,
Dave
 
edited by moderator

ginaguy18p0r,

all eight of your posts have this link.

This site is no place for pornographic material. YOU'RE OUTTA HERE .

:mad:
 
See the way Dave is?????????????????
It is all about the drivers and lightnings first then about buisness second.
If anybody buys anything from anyone else, they need their brains tested.

That being said, what about the Pickrel tensioner??????
Wil it be ready to sell to us soon? Pretty please?
 
I called Dave today and got my pulley on the way. Thanks for your help Dave :tu: and i'll let you know about the pipes and ignition system.
 
You must log in or register to reply here.
Back
Top