I wish had coated turbo hot sides but they will be covered with a blanket
Project snowball
- Thread starter lightning_2000
- Start date
393w
8.8 to 1 compression
Trickflow 170 box stock heads
tfs stage 2 cam
Vortech sq went 7.20s in 1/8 14 psi was tight convertor I didn't want to push vortech much more I killed a few trying!
Novi 6.88 in 1/8 15 psi was with 3200 convertor
i bought 10 rib pulleys and was gonna give it 22 psi. But it sucked the end of a filter thru it.
Novi 2000 has potential!
S484 turbo 14 psi 6.55 in 1/8 same 3200 convertor that was 3rd track outing. 1st outing was 18s and nitto 555s
2nd outing was on bogarts and getting tune up good!
Sweet spot for that turbo would of been 18-22 range. I tried to give it to it the last track outing of that combo but wasn't enough co2 pressure. Aka why i went on board air
There is alot of potential in that combo
3 outings and 6.55@107.xx was nothing to sneeze at. More fine tuning of launch and shift points and convertor lock up would of got it as is to a 6.3x-6.4x I feel on 14 psi! I tried harder launch that outing but track didn't want to hold it
Peeps will see once Robert gets it all back together and tuned in
If block holds I feel a 5.99 is doable!
That's gonna require good air and everything right and a good 60!
No rush here. He's gotta
Do oil lines
And oil drains
Get holley dash all wired up so fuel gauge and all that works
lightn95
Well-known member
I hear ya.
Not rushing here either, just trying to do it right....again
Truck is now running on holley
Should be tuning next week or 2
Should be tuning next week or 2
scott sanderson
Active member
Looking good Billy, get that truck on the road.
95sporty150
Member
Does the IC mounted that high effect engine cooling?
No sir
I've ran blowers and single turbo with coolers like that
I even ran ac on all last setups minus this 1
Cooling is not a issue. Even In humid Tennessee weather
Everything is finally finished up minus new fuel system
It was all on passenger side with the single turbo kit
So redoing it all. I definitely don't want any issues
Injectors got sent out to make sure perfect also and they are
She should be home very soon!
It was all on passenger side with the single turbo kit
So redoing it all. I definitely don't want any issues
Injectors got sent out to make sure perfect also and they are
She should be home very soon!
Attachments
-
received_300590279707989.jpeg -
received_1811647232613528.jpeg -
received_381786441307509.jpeg -
received_1459155004695095.jpeg -
received_294494013463387.jpeg -
received_312203171513163.jpeg -
received_1353036825405692.jpeg -
received_1564243187467992.jpeg -
received_1137306713933242.jpeg -
received_336601328849252.jpeg
scott sanderson
Active member
Nice looking welds.
Been wondering what the latest was! Long time coming.