Project snowball

[lightning_2000]

Project snowball is in full effect


My gen 1 should be running shortly


I found a local guy with some serious skills for welding stainless and aluminum

Truck is now
Dart 427
Ported cnc high ports
A1 stage 3 trans billet rollerized
Holley hp with crank trigger yada yada
12.3 dash going in also
Twin 6980s billet wheel turbos from forced inductions

Chiseled a2a innercooler
Volvo steering pump
I also picked up a tce big brake kit and met up with Mr fmos racing



Here is a few pics

Pony down headers mild steel
I used a jig to build hot side. This was before I got with local guy! But pal let me use a jig so could make it happen!
Stainless hot side
Aluminum cold side

Vibrant clamps
Jgs waste gates and blow off

 

[Raymond_B]

Nice, can't wait to see it running!

 

[glenbartley]

Wow very nice. That's going to be sweet when it's running. Super nice work. Awesome truck build.

 

[ASAP]

Lookin good Billy!


Sent from my iPhone using Tapatalk

 

[FMOS Racing]

About time you updated the saga here! Getting close, Billy!

 

[lightn95]

Looks good Billy!

 

[lightning_2000]

I had co2 and boost leash on old setup

Holley will control boost ramp this time
1 of my track adventures I couldn't give it more boost

So I ditched the co2
Putting on board air this time!

 

[Raymond_B]

Fancy!

 

[lightning_2000]

Cold side piping is done
Hes been prepping for holley install


And cleaning up excess wiring that's not needed


Hotside needs wastegates installed and few knick nacks

And run some exhaust piping

 

[lightning_2000]

Air pump finished up

 

[lightn95]

Air pump finished up

How loud is the pump in the cab?

 

[lightning_2000]

How loud is the pump in the cab?

Idk yet

My buddy's race car wasn't bad.


Gotta think it won't be running a whole lot

 

[lightning_2000]

My kit is all stainless and aluminum

Headers was not

So they got ceramic coating!

Should really all go together now

 

[ASAP]

Looking good Billy!


Sent from my iPhone using Tapatalk

 

[FMOS Racing]

All Billy's engine porn is making me itch to get something nice going for the red truck, and stuff the 393 into the white truck.

 

[ASAP]

All Billy's engine porn is making me itch to get something nice going for the red truck, and stuff the 393 into the white truck.

Probably ought to start saving now.. this stuff is expensive these days. Billy’s got them deeep pockets.


Sent from my iPhone using Tapatalk

 

[lightning_2000]

Had to get a harness to connect the ls coils
Was on a back order but it's in now

Hes assembling the wiring and wrapping it up


Gonna mount it in passenger kick panel or glove box and drill small how in the firewall so wires will go in behind intake. Aka clean it up and be hidden

 

[FMOS Racing]

Where are you putting the coils?

 

[lightn95]

Where are you putting the coils?

I believe he got the Baller valve covers to put the coils on

 

[lightning_2000]

Motion raceworks valve covers
With firecore wires