That's awesome and looks even shorter than mine. Can you take a video so we can hear it? Also what's the part# on those mufflers?
Have to remember that the stock pumps are going to be moving a LOT of fuel with no pressure. I did some math once regarding someone's surge setup, maybe Travis', and estimated it would take over a minute at WOT to empty the surge tank. When are you ever going to be at WOT for over a minute??
Mine is a gallon capacity minus the pump and such inside. I'd have to do the math again to see how long it would take to run dry if the stocker wasn't pumping but with the stock pumps will be flowing quite a bit more than expected as they are free flowing compared to making pressure so they work pretty good at keeping the stock tank filled up. You will need to exceed that consumption rate plus the capacity of the tank during a pull for it to be a concern.
Hey David. Where are you thinking of mounting that?
Sent from my iPhone using Tapatalk
Fuel temp won't be an issue. The fuel won't be going into the engine compartment and the pump won't be under any kind of load. Those two things are what puts heat into the system.
Yeah been there done that with the heater hose fitting. Let me see if I can find the part#, pretty sure it was an Earl's or Aeroquip 45* fitting.