Has anyone run a sensor off the Ford rail mount style Aeromotive FPR? I want to leave my gauge alone and add one dedicated for the ECU via the expansion port. Seems like it would be a tight spot for the Ashcroft transducer.
I just ordered another fuel pressure gauge to get the smaller looking sensor and harness. YES the sensor fits below the vacuum/boost reference nipple on the Aeromotive rail mount FPR. Now I have two independent sensors and properly calibrated readings.
As a side note if you want to use Fuel Pressure Safety the generic sensor input values have to be set in KPa not psi. I didn’t read the tool tips I guess.