95_LGT_150
Member
should i change it i have 66,000 on it and would it be worth my time ..
were is the pcv valve on our trucks
- Thread starter 95_LGT_150
- Start date
Lightning Struck
Active member
It's on the lower manifold way in the back of the engine by the firewall.. I haven't changed it yet either, and who knows that's all I might need for 14's 
95_LGT_150
Member
well if it will cure slow reaction times and rough idle then i will try.do i half to remove the upper intake
Yes and no!
I just got through doing a head swap and this thing is a ***** to get to....
Problem shouldnt be getting the PVC out of the manifold hole, but getting it loose from the hose that will be a chore! There are a lot of things back there in the way so you can't get your hand in there... such as vacuum hoses fuel lines ect.
What I would do is lay across the top of the engine and reach in with your right hand from the driver's side next to the firewall and pullit up out of the lower manifold.... then give it a shake if you hear it rattle it is still good and put it back in. Also a nice mechanics mirror helps you get a visual of the mess back there.
Later on
Steve
