Rocker arm

[RED SVT]

Got my heads off and One of my crane rocker arms is hard to rock back and forth as apposed to all the rest that rock with a tap of the finger. The local head guy told me to put it in a can of trans oil and heat it up and let it soak for a while......... But i dont konw if i want to put a bad rocker on a set of new trickflows..Can i just purchase one rocker?? Also how do i find out what size rocker i have because the guy that had the truck before me said he had rockers put on but im not sure what size these are........

 

[core-rider]

Is it a roller rocker or just a roller tip rocker? If it is a pedestal mount roller rocker the part # should be 44746-1. The 1 willl denote one rocker instead of 44746-16. That is the part # for a stock replacement style pedestal mount 1.7 ratio rocker.(Energizer series)

Yes most places you can buy just one rocker, but you may have to special order it. At the store I used to work at we would just sell one out of the pack and then order another to replace it with. Maybe your local shop will do the same for you.

If it isn't that style rocker, let me know and i'll try and come up with the right #.

 

[RED SVT]

The only part # i see is on the top of the rocker which is
F3ZE-6529-AB ..........


byt the way thanks for the help

 

[Thundrn_Lightning]

The only part # i see is on the top of the rocker which is
F3ZE-6529-AB ..........


byt the way thanks for the help

That's a Ford part number. Head off to the dealer and see what they tell you. I'm sure they will sell you one. Tell them it is for a '93 Cobra.

Good luck,

 

[RED SVT]

So is this a 1.7 roller rocker arm and should i use these on my new heads????????

 

[Thundrn_Lightning]

So is this a 1.7 roller rocker arm and should i use these on my new heads????????

If it is truly that part number, it is a '93 Cobra 1.7 ratio rocker. Crane supplied them to Ford. I'd say it depends on your cam combo whether or not to use them...

Have fun,