new valve covers...

[yesIdid]

Do u fellas have any part#s that will work with the intake and the oil filler. I've heard ordering new valve covers could be a nightmare.

 

[yesIdid]

All of u fellas are using the stock valve covers .

I was thinking a spacer between the intakes might help create some clearance. My stock units look like S**T.

Anyone????????

 

[Bimota Guy]

Mine are stock, but I know many people have run a phenolic spacer like you sugested to clear tall covers.

 

[Jason L]

FMS valve covers

I installed the FMS M6000J302 vavle covers with the 1/2" phenolic intake spacer FMS M9486A52, both parts from Summit. The oil filler is in the same location as original. The valve covers are black wrinkle finish with aluminum polished fins and have the Ford logo and say MOTORSPORT. The baffle on the passenger side for the oil fill must be removed for 1.7 roller rockers. Later I installed my kenne Bell, and removed the spacer, no problems with clearance, and looks good with the black blower. Hope this helps.

Jason Lavers

 

[yesIdid]

Thanks!!!!!!!