horsepower estimates

[nast94]

What kind of flywheel/rearwheel horsepower/torque, could I expect from this application?
Jacobs ignition 5.0 pack
Vortech S-Trim 8psi
Powerstroke intercooler
Custom Tuned w/EEC Tuner
Intank 255lph pumps/FPR
30# injectors
Flowmaster mufflers
How much more with 10psi?

Motor is all original with 98k miles but very strong. Runs 14.90s with only flowmasters/timing/Jacobs 5.0 pack

 

[sstock]

I'll take a stab, with stock heads and cam about 360rwhp.
with 10lbs of boost add another 30 or so.
Anyone else?

 

[Litng1]

Sounds pretty good but maybe a tad high.

 

[thePUNISHER]

intercooled at 10psi id say youd be making more than 360 horse! especially with a good tune. carolinalightning is running a similar setup minus convertor and he ran 12.1 in the 1/4. it takes alot more than 360 hp to run that with one of these trucks. id figure youd be making over 400. anyone else?

 

[nast94]

I would love to be putting 360 plus to the ground. Twelves are my goal. If yall think twelves shouldn't be a problem I'm happy.

 

[Muddmann]

...with 10lbs of boost add another 30 or so

...are you serious??? 10# of (intercooled) Vortech is worth only +30 horsepower? me thinks differently there, Mr. Watson

 

[HouseofSpeed]

Mark...you letting everyone in on our top secret project???

Seriously...we will make her fast. No worries brother.

 

[nast94]

Busted!!!!!!