Guess what I did??
- Thread starter UBNSTRUK
- Start date
Ebbsnflows
Brand Dis-Loyal
UBNSTRUK said:
Do we really have a choice??
cobrayankee
NLOC member 928
If you can't post them, send them to me at jeffrey.koenig@nextiraone.com
Also, what kind of paint did you use?
Also, what kind of paint did you use?
Adrenaline
Member
I want to see the pics too!
cobrayankee
NLOC member 928
Did it before
They came out awesome on my Cobra, but it was black and so were the wipers already, so all the paint really did was make them look glossy. But it did look nice!
They came out awesome on my Cobra, but it was black and so were the wipers already, so all the paint really did was make them look glossy. But it did look nice!
B
Bulldog
Guest
thats like a chick asking you if you REALLY want a blow job!
cobrayankee
NLOC member 928
Bulldog said:
If you want to put viewing pics of painted windshield wipers in the same category as a BJ that's your choice, but there's a tad less interest in the wipers for me.... :Y
;t
well....
First you pop off the black cover at the bottom with a flathead screwdriver then you remove the nut under it. After that, you have to pull really hard, but make sure you pull straight up because It will be easier to take off. The hard part is to take off the rubber on the windshield. I cant really explain that I had a friend do it for me. You then put a very light coat of a color that matches (go to a Auto Mart store like Checkers they will help you out!) your paint then you let if sit for ten minutes and do it again and again until its the color you like. But beware dont just spray the paint on because It will look really bad and not as solid as the way I described. By the way I used a spray can. I did not sand off anything because my windshiled wipers are very clean. (I live in Arizona). If anybody needs help e-mail me at Basktbalr7@aol.com.
Good Luck,
UBNSTRK
P.S. it takes about 30-45 min. because of drying period. YOu could wash your truck while they are finish drying.
First you pop off the black cover at the bottom with a flathead screwdriver then you remove the nut under it. After that, you have to pull really hard, but make sure you pull straight up because It will be easier to take off. The hard part is to take off the rubber on the windshield. I cant really explain that I had a friend do it for me. You then put a very light coat of a color that matches (go to a Auto Mart store like Checkers they will help you out!) your paint then you let if sit for ten minutes and do it again and again until its the color you like. But beware dont just spray the paint on because It will look really bad and not as solid as the way I described. By the way I used a spray can. I did not sand off anything because my windshiled wipers are very clean. (I live in Arizona). If anybody needs help e-mail me at Basktbalr7@aol.com.
Good Luck,
UBNSTRK
P.S. it takes about 30-45 min. because of drying period. YOu could wash your truck while they are finish drying.
B
Bulldog
Guest
very nice!
Hey ubnstruk,
This is what you just said:
"then you remove the nut under it. After that, you have to pull really hard, but make sure you pull straight up because It will be esier to take off. The hard part is to take off the rubber.."
What the h*ll were you thinking man :Y
This is what you just said:
"then you remove the nut under it. After that, you have to pull really hard, but make sure you pull straight up because It will be esier to take off. The hard part is to take off the rubber.."
What the h*ll were you thinking man :Y
B
Bulldog
Guest
ewww gross!
