fosgate

[FAT]

--------------------------------------------------------------------------------
I have a PUNCH 360.2 amp like new and need some juice for
the four corners,is there a way to make this amp power four speakers?

Have my punch 10"s and a lightly used 800.2,plusa400.4 power series
amps in the boxes,its to ****ing cold in the garage to put the enclosure together so ill wait a few weeks.
but till then i want that 360.2 on all four corners if it can be done.

Any info appreciated.

 

[BigVito]

sorry but im gonna give you a generic answer and head there myself, but check the website ?

 

[mr12volt]

Fat,
No problem.Just parallel the right speaker leads front and rear and use 1 channel.Do the same for the left front and rear and you will have a 2 ohm stereo load which this amp will work great into.
Hope this helps,
Paul

 

[svtruck]

Just for information, for use down the road. What amp does anyone recommend that is 5 channel (4 + 1 for the sub) that puts out decent power? I saw some Fosgate ones, but they didn't seem to put out much sub power. Thanks

 

[FAT]

5 channel

There out there just big bucks!!!!

 

[blown99]

To COLD in Texas?????

 

[FAT]

hell yea!

It was frigin 45-55 here a few nights a go,man thats cold.
What it boils down to is im f#%kin lazy!!!!!
I just measured agian tonight and will start cuttiing in the next few days.
Im going to cut out my 8"boxes to fit these 10s for now,what the fu%^.

 

[BigVito]

Just for information, for use down the road. What amp does anyone recommend that is 5 channel (4 + 1 for the sub) that puts out decent power? I saw some Fosgate ones, but they didn't seem to put out much sub power. Thanks

you can get a 6 channel and use the two to power the sub(s)

 

[blown99]

It is not a good idea to cut the 8" boxes out to 10". You may not have enough volume for the 10's to work in such a small enclosure. I was able to put two 10" boxes with mephis subs behind the seat with the plastic storage tray removed. I use a 500W 2channel amp for the subs. I also run memphis tweeters in the doors and cab corners and power those with a punch 100. I still use the stock head unit and relocated the factory disc changer to under the passenger seat. No distortion here!

 

[LightningSVT18]

Just for information, for use down the road. What amp does anyone recommend that is 5 channel (4 + 1 for the sub) that puts out decent power? I saw some Fosgate ones, but they didn't seem to put out much sub power. Thanks

What I would recommend would be the Pheonix gold XS6600. It is not there top of the line series but they still sound real good. And it is 50 x 4 and 75 x 2. The 75 x 2 can be bridged down to 300 x 1. So you would effectively have 50 x 4 and 300 x 1. That's all for a list price of $730. I don't know what they are going for retail. This amp is a 2001 amp. I just checked out Pheonix gold online and it appears that they are no longer going to carry the XS series amplifiers. You can check them out at http://www.phoenixgold.com/

But if your looking for alittle more power for the surround speakers Alpine makes the MRD-F752 which is 75 x 4, and 250 x 1. The 250 x 1 is a mono channel it is not two channels bridged together. It has built in 12-db crossovers. It lists for $900, but once again I have no Idea what they go for at retail price. You can check it out here

 

[svtruck]

Thanks! Those are out of my price range though, so I'll have to get two amps I suppose. But thanks again for the info!