eibach springs

[points]

I know this subject has been beat to death, but are the eibach springs 1"? Their website says 1.3" but everyone else says just 1". Also, are there 2" springs for our trucks? I think a 2/2 drop would look pretty good, and keep the "raked" look, especially when both tanks are full. Also, if anyone has pics of these springs and the belltech shackles, that would be great. If you don't want to post them, email me at points3@juno.com. Thanks
p.s.
where do I get the alignment kit, I really don't want the local tire place to charge me $100.00 for it if I can get it cheaper.

 

[Nick Wilson]

I have the 1.3 eibachs. You will need to get the chamber adjusting kit to get the correct chamber. Otherwise you will negative 2 dgrees, and it will look funny. If you go lower than the 1.3 you will need different spindles. ;t I also have the eibach 2 inch rear drop. It looks sportyer with this combo but try the rear drop befor the front. Some people here have just that.

 

[HotRod]

I also have the Eibachs on the front. Initial installation, they are 1" but after they settle in in about a month or so, its more like 1.5".

Also, I just had my toe reset to factory spec and left the camber alone. This cost me $20 or so. The tires lean a little more than stock, but Ive noticed no tire wear problems with this setup. The eccentric bushings and the alignment are about $100.