Calling Hot Rod

[baby2000]

Hey how are you doing, i was just told by GEN14U2NV that you have a home made ram air kit. I was wondering if you could give me all the part numbers and maybe show me some pictures so that i can do it myself. TIA

 

[baby2000]

TTT

 

[HotRod]

Ill get back with you this evening with the parts it takes to build your own cold air induction. You do have to cut a small area in your radiator support with a sawzall. Its only a little 4"x4" area, but it works good. Talk to you later.....

 

[baby2000]

Hey thanks Rod i really appreciate it. I will be waiting hopefully i can do it tonight.

 

[baby2000]

TTT

 

[HotRod]

OK. Ive got a split second!

Sorry for the delay. Here is a parts list and what you'll have to do to cut the radiator support.
1) 10'x 4" drain pipe (thin wall)
2) 2- closet 90*s They are 4" to 3".
3) 1- 4" 45*
4) 3- 3" wide hose straps
5) 9" K&N conical filter
6) PVC glue
7) Sawzall

It takes a LOT of measuring and test fitting to get it all lined up BEFORE you glue anything together. The scaries part (but not hard) is cutting the radiator support. There are pictures in the NLOC archives to look at as a guide.

You know I should start selling these in kit form. I could pre-cut all the lengths and give a detailed instruction. Hmm...

 

[baby2000]

Thanks for all of your help Rod. I will try to do this tonight.

 

[baby2000]

Hey Rod its me again and i looked through the archives but i could not find any pictures of the set up. I am a little scared of doing it without looking at some pictures can you take some pics or tell me what the title was on that thread. Thanks Rod and sorry for bothering you again.

 

[baby2000]

baby2000

Thanks anyway John if you come across it can please email me the pics.

 

[HotRod]

I can do you one better. I can Email you all the pics of the CAI. It will be this evening, though. Im going racing and I have to get the Centerlines mounted up and the truck ready to go. Its time to whip those F-bodies again!!

 

[baby2000]

Hey thanks Rod.

 

[GEN1_4_U_2_NV]

HOTROD, if you dont mind, I think a lot of people here would like to see that ram air set up again. Also if you post it here again, it will be in the archives for later referance. I know for one that I would like to see the pictures.

 

[Jason Jones]

I would love to see the pics too! If you could post them that would be great! Thanks

 

[HotRod]

I dont know how to post any pictures on here. I can Email them to one of you guys if you'll post them for me. Who up for posting???

 

[HotRod]

Hey John, the pics are on their way. Thanks alot.

 

[BLoG]

I can't wait to see.

Think it would work with a powerdyne?

 

[HotRod]

Hey John, Thanks for posting the pics. I have a few of those clamps here at home. Ill try to get to the hose & pipe place down the street and see if I can get a piece similar to what those are. These came from a job I was on about 2 years ago when I first started thinking of the CAI. Ill let you know what I can dig up.

 

[Robert Walton]

I built kind-a-sorta the same thing and used a 3"-4" rubber reducer, 3" side on the T.B. and the 4" on the PVC pipe. It can be found at Home Depot speed shop

 

[HotRod]

Thats what the closet 90*s are. They are PVC like the rest of the system instead of rubber.

 

[baby2000]

Hey thanks for all of your help. I went to Hoe Depot and they could not find all the parts. Then i went to another plumming shop and they did not have the 3" Hose Straps. I will keep on trying to get all the stuff together and then get all started.