Backspacing on Gen 1 wheels?

[Anuerysm]

Does anyone know what the backspacing is on the stock gen 1 wheels?

 

[George G.]

Nope, but I think if you take a wheel off and lay it face down, get a tape measure and set the end on the back surface(inside) where the lug holes are. then get a straight edge that will go across the rim. The measurement from the center surface to the edge of the rim should be the backspacing. It's a little hard to explain in words. If I'm wrong, someone might chime in.

George

 

[Copperhead]

It's around 4-1/2" or 4-3/4" if memory serves me correct! Been a while since I checked it!

 

[George G.]

If you're getting new wheels, just be sure you don't give it the roller skate look with the wheels sticking out the fender wells. That makes me so sick when those idiots do that. How stupid does one have to be to not realize that it looks retarded? Anyway, I'm done venting.

George