Computer Issue I think 93L

[93blackbeauty]

Yeah I bought new arp hardware and there was a light coating on the surface of the gasket I wiped it down smooth so very little was actually on it. I'm really just trying to nurse it at this point this thing seems really neglected. If I can slow the oil consumption enough I plan to rebuild later next year. That's my only goal right Now. It's using a quart every 500 miles. So I went after every leak I could find to try and slow it down. Thanks for the info though!

Sent from my 2PS64 using Tapatalk

 

[93blackbeauty]

This is the nipple I used to replace my oil cooler from the filter adapter on my 93.
https://www.summitracing.com/parts/TRD-1034/

Did you have to use any locktite or anything on this? I don't see any way to tighten it other than hand tight it's completely smooth inside. Don't want this thing backing out on me.

Sent from my 2PS64 using Tapatalk

 

[93SVT]

Now is a good time to install Struckby's protection harness.


Sent from my iPhone using Tapatalk

What's the story with this? This something to do with the 60 pin connector?