Measure twice & cut once.
With cut-off wheel in hand the slicing begins.
After about 20 minutes of work the frame is completely cut.
The Western Chassis support is clamped into place and centered.
After drilling twelve 1/2" holes the support is now secured to the frame. Believe it or not the frame is now stronger than stock.
With cut-off wheel in hand the slicing begins.
After about 20 minutes of work the frame is completely cut.
The Western Chassis support is clamped into place and centered.
After drilling twelve 1/2" holes the support is now secured to the frame. Believe it or not the frame is now stronger than stock.
your ride is looking bettter everytime I see it .